Part Number: 04-100
Simms Machinery and AMP have developed a market exclusive Butt Joint Assembly Method for joining together both interior and exterior trim sizes up to 1" x 6". This new joining process consist of AMP’s U-500 Backnailer Joining Machine equipped with a 90 degree Material Fencing System.
The material fencing consist a of Moveable Fencing Arm, a Fixed Rear Fence with Magnetic Inserts, three (3) different sized Spacer Blocks for Off-Set Joining, and pre-set production stops for setting the left and right side joining positions for Hoop Assembly. A Double Hydraulic Clamping System is used for securing the trim moulding in place during the joining process.
The Butt Joint Assembly System can be purchased separately with new machines or can be field installed on existing customer units. The joining method can also be used with AMP’s U-600 if a Multi-Channel Backnailer is needed.
| (2) | Side Mounting Brackets |
| (1) | Rear Fencing with Magnets |
| (2) | Production Stops |
| (2) | Riser Blocks for Protective Guard |
| (1) | Clear Protective Guard |
| (1) | Carriage Rail |
| (1) | Moveable Arm with Carriage Plate |
| (3) | Spacer Blocks (1”, 1/2” 1/4”) |
| (1) | All necessary hardware for installation |
| P/N | |
| 04-024 | Replacement Pad - Black (HW) |
| 04-025 | Replacement Pad - Yellow (MW) |
| 04-026 | Replacement Pad - Blue (SW) |
| P/N | |
| 04-032 | Extension Wings Kit |
| P/N | |
| 04-090 | Nail Head - 3mm |
| 04-095 | Nail Head - 5mm |
| 04-091 | Nail Head - 7mm |
| 04-092 | Nail Head - 10mm |
| 04-093 | Nail Head - 12mm |
| 04-094 | Nail Head - 15mm |
| Interior / Exterior Trim | Max Distance between V-Nail | Pre-set V-Nail Position Stops |
| Up to 1” x 6” | 5 3/4” | Multiple |
| V-Nail Size | Off-Set Joints |
| 12mm Software V-Nail is recommended | 1”, 1/2” & 1/4” spacer blocks are available |
The material fencing consist a of Moveable Fencing Arm, a Fixed Rear Fence with Magnetic Inserts, three (3) different sized Spacer Blocks for Off-Set Joining, and pre-set production stops for setting the left and right side joining positions for Hoop Assembly.
To set the joining line, the operator positions the trim directly in the center of V-Nail Head, then slides the moveable arm into position. After setting the joining line and securing the sliding carriage in place, a pre-set production stop is then tighten for production repeatability. This step is repeated for both the left and right position for completing Hoop Assembly.
A Double Hydraulic Clamping System is used for securing the trim moulding in place during the joining process.
Simms Machinery represents and offers AMP’s U-Series Backnailer Machines for providing door casing joining solutions. Simms Machinery sells and services complete machine packages including delivery, installation, operation set-up, tool kit and on-site machine operator training. Supported by AMP’s Technical and Manufacturing teams, Simms Machinery offers unmatched millwork joining experience.
